Direct access to:

Jobs opportunities:

G-Rob video:

Our products:

 

Technical Specifications for MicroMounts™

Pins Length   SPINE length
Diameter   0.025" (0.64 mm) diameter
Material   Solid 316 non-magnetic stainless steel
Notes   Beveled at 30 degrees at each end.
 
Crystal holding mount
Material   Polyimide (used in Kapton tape)
Crystal aperture sizes   10, 20, 30, 50, 75, 100, 150, 200, 300, 400, 500 and 600 micrometers
Thickness   7.5, 10 and 12.5 micrometers, depending on size of crystal aperture
Distance from center of alignment cross to center of crystal aperture   870 micrometers
Distance from pin base to center of crystal aperture   18.5 mm (for SPINE length pens)
Width of wicking hole   250 micrometers. Compatible with Size 15 paper wicks.
Length tolerance   0.5 mm.
 
 
  ©Copyright 2008 NatX-ray. All Rights Reserved.
     Design by Interspire